MCU ID: 0x1201
FLASH ID0: 88DE0020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: F:\flash\1100.arbic\rh18_08.110
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: F:\flash\1100.arbic\rh18_08.110
PPM Flash file: F:\flash\1100.arbic\rh18_08.11ia
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Backing up PM Field 208 as RPL...
Setting local mode...
Failed! Aborting!
Failed to backup imei...
MCU: F:\flash\1100.arbic\rh18_08.110
Booting phone...
Phone didn't answer with TX line high after power on!
Causes:
1. Phone don't power on -> Check cable
2. TX pin from phone don't make contact -> Check cable
3. UPP damaged -> change UPP
MCU ID: 0xAAAA
This MCU ID is not supported in chosen flash file...
Error booting phone...
Backing up PM Field 208 as RPL...
Setting local mode...
Reading IMEI...
Reading IMEI data...
IMEI data corrupt...
Failed to backup imei...
MCU: F:\flash\1100.arbic\rh18_08.110
Booting phone...
MCU ID: 0x1201
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A0
Boot is ready...
FLASH ID0: 88DE0020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0xDE882000
Flash loader is C:\Program Files\ODEON\JAF\Flash\u_st_i.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x4B28; Loader chk: 5d
Loader is ready...
P-key nokia module version 01.02
MSID: 842CF833392CA8141873302300
MSID decoded: 3E4EBAE900578E00A9000000
FAID: 4CEBEA356300C560AB200B4C
Operation took 0 minutes 5 seconds...
Erasing...
Found 5 interval(s) to erase
Erasing area: 01000000 - 0100FFFF...
Erasing area: 01010000 - 011EFFFF...
Erasing area: 011F0000 - 011FBFFF...
Erasing area: 013F0000 - 013FBFFF...
Erasing area: 017F0000 - 017FBFFF...
Operation took 0 minutes 31 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 9 seconds...
Restarting MCU...
PPM: F:\flash\1100.arbic\rh18_08.11ia
Booting phone...
MCU ID: 0x1201
BOOT file: C:\Program Files\ODEON\JAF\Flash\u_2nd.fia
Loader version: 04.46.01 -> Revision: 0007
Boot size is 0x09A0
Boot is ready...
FLASH ID0: 88DE0020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 10
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
Flash ID is 0xDE882000
Flash loader is C:\Program Files\ODEON\JAF\Flash\u_st_i.fia
Loader version: 04.46.01 -> Revision: 0007
Loader size is 0x4B28; Loader chk: 5d
Loader is ready...
P-key nokia module version 01.02
MSID: 84948169DDE11BE4CC531A88AF
MSID decoded: 3E4EBAE900578E00A8000000
FAID: B9EAF11C5358DACDEDA33981
Operation took 0 minutes 6 seconds...
Erasing PPM...
Found 2 interval(s) to erase
Erasing area: 01170000 - 0117FFFF...
Erasing area: 01180000 - 011EFFFF...
Operation took 0 minutes 8 seconds...
Writing...
Perm. Data Restore OK
Operation took 0 minutes 2 seconds...
Restarting MCU...
Flashing Done!
Operation took 1 minutes 9 seconds...
After flash processing...
Waiting for phone to boot...
Reading...
Phone type: RH-18, Software version: 8.11
IMEI: 353375001362242
Product Code:
Resetting PPC...
Done!
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 5 seconds...
Done!
Setting test mode...
Resetting USER DATA...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting LEAVE FACTORY...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting SERVICE CENTER...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting UPGRADE SOFTWARE...
Operation took 0 minutes 0 seconds...
Done!
Setting test mode...
Resetting PRODUCTION TUNE...
Operation took 0 minutes 0 seconds...
Done!
Changing mode...
Done!
المفضلات